Bently Nevada 200151-40-03-00 Accelerometer Standard Cable 4.0m Armored

Product Overview

When harsh industrial environments threaten signal integrity in vibration monitoring, the Bently Nevada 200151-40-03-00 accelerometer standard cable delivers reliable performance. This 4-conductor, 22 AWG cable with braided shield and drain wire (85% coverage, minimum) ensures accurate data transmission from accelerometers to monitoring systems. Designed for demanding applications, this cable features a PVC outer jacket and nickel-plated coupling nuts for long-term durability.

Key Specifications

Model: 200151 – Accelerometer Interface Standard Cable, Connectors on Both Ends

Cable length: 4.0 meters

Armor option: 03 – Blue cable with armor

Coupling nut: 00 – Standard coupling nut

Construction: 4-conductor, 22 AWG with braided shield and drain wire (85% coverage, minimum), PVC outer jacket, nickel-plated coupling nuts

Seal: Connectors provide an IP67 seal to transducers and mating hardware; connectors are molded to the cable; DC4 electrical insulating compound in connectors provides additional protection against moisture during thermal shock

Minimum bend radius: 63.5 mm (2.5 in)

Operating temperature range: –20 ºC to +100 ºC (–4 ºF to +212 ºF); cables may be used at lower temperatures if installation prevents flexing or bending; flexing below –20 ºC may damage cables

Cure time: 24 hours

Temperature range (cure): –55 ºC to +121 ºC (–67 ºF to +250 ºF)

Industry Applications

The 200151-40-03-00 is essential for vibration monitoring in rotating machinery such as turbines, compressors, pumps, and motors. Its armored construction and IP67 seal make it suitable for harsh environments including oil and gas, petrochemical, power generation, and heavy manufacturing. The cable's 4.0-meter length provides flexibility for routing from accelerometers to junction boxes or monitoring systems.

Installation & Setup Guidance

When installing the Bently Nevada 200151-40-03-00, ensure the cable is routed with a minimum bend radius of 63.5 mm to avoid damage. Avoid flexing the cable at temperatures below –20 ºC. The connectors are molded to the cable and provide an IP67 seal when properly mated to transducers and hardware. For additional moisture protection, apply DC4 electrical insulating compound as recommended. Cure time is 24 hours at temperatures between –55 ºC and +121 ºC.

Maintenance & Reliability

Regularly inspect the cable jacket and connectors for signs of wear, cuts, or moisture ingress. Verify that the coupling nuts remain tight and the IP67 seal is intact. The armored blue jacket provides mechanical protection in high-traffic areas. For long-term reliability, avoid repeated flexing at low temperatures and ensure the cable is secured to prevent vibration-induced fatigue.

Selection Guide & Purchasing Advice

Before ordering, confirm that the 200151-40-03-00 meets your required cable length and armor specifications. This model features a 4.0-meter length, blue armor, and standard coupling nut. For different lengths or armor options, refer to the Bently Nevada 200151 series ordering guide. BluePLC Industrial stocks genuine Bently Nevada cables and can assist with compatibility questions. Please verify current lifecycle status and availability with BluePLC Industrial before ordering.

For complete technical specifications for the 200151-40-03-00, please contact BluePLC Industrial.