Bently Nevada 330104-00-13-05-02-00 3300 XL 8 mm Proximity Probe

Why Choose the Bently Nevada 330104-00-13-05-02-00 for Vibration Monitoring?

When unplanned downtime threatens production targets, the Bently Nevada 330104-00-13-05-02-00 provides a reliable solution. This 3300 XL 8 mm proximity probe delivers precise displacement measurements for critical rotating machinery, helping you detect early signs of bearing wear, shaft misalignment, or imbalance before they escalate into costly failures.

Product Overview

The Bently Nevada 330104-00-13-05-02-00 is a 3300 XL 8 mm proximity probe designed for non-contact vibration and position monitoring. It features an M10 x 1 thread with armor for robust mechanical protection in harsh industrial environments. The probe includes a 0.5 meter (1.6 feet) standard cable terminated with a miniature coaxial ClickLoc connector, ensuring secure and quick field connections. This model is part of the trusted 3300 XL series, known for its accuracy and durability in turbomachinery, compressors, and pumps.

Technical Specifications Breakdown

Understanding key specifications helps you match the probe to your application. The 330104-00-13-05-02-00 has an unthreaded length of 00 mm and an overall case length of 130 mm. Its total length option is 0.5 meter (1.6 feet). The probe tip is made of polyphenylene sulfide (PPS), offering excellent chemical resistance and electrical insulation. The probe case is constructed from AISI 303 or 304 stainless steel (SST), providing corrosion resistance in demanding environments.

The nominal probe DC resistance from center conductor to outer conductor is 7.45 ± 0.50 ohms for the 0.5 meter length. This value is critical for system calibration and ensures accurate signal transmission. The probe is designed to seal differential pressure between the tip and case using a Viton O-ring, making it suitable for applications where pressure differentials exist.

Industry Applications

This proximity probe excels in monitoring rotating equipment such as steam turbines, centrifugal compressors, and large electric motors. In a typical installation, the 330104-00-13-05-02-00 measures shaft radial vibration and axial position, providing data for predictive maintenance programs. Its 8 mm sensing face and 3300 XL system compatibility ensure consistent performance across a wide range of machinery, helping reduce unplanned downtime and extend equipment life.

Installation & Setup Guidance

Proper installation is key to accurate readings. Mount the probe using the M10 x 1 threaded section, ensuring the tip is gapped at 1.27 mm (50 mils) from the target surface for standard calibration. Use the ClickLoc connector for a secure cable attachment, and route the cable away from high-interference sources. Verify that the system power supply meets the -17.5 Vdc to -26 Vdc requirement for non-incendive circuits, or -23 Vdc to -26 Vdc with barriers, to maintain linear range.

Maintenance & Reliability

Routine inspection of the probe tip and cable for physical damage helps maintain measurement integrity. The PPS tip and stainless steel case resist most industrial contaminants, but periodic cleaning with a soft cloth is recommended. Check the Viton O-ring seal integrity if the probe is exposed to pressure differentials. Following these simple steps ensures long-term reliability and consistent performance from your 330104-00-13-05-02-00 probe.

Selection Guide & Purchasing Advice

Before ordering, confirm that the 330104-00-13-05-02-00 matches your system requirements: verify cable length, thread type, and connector style. This model uses a miniature coaxial ClickLoc connector with standard cable. If your application requires agency approval, note that this unit has the "Not required" option. For current availability and lifecycle status, please contact plcmatrix.com, a trusted supplier of Bently Nevada components and industrial automation parts.