Bently Nevada 200152-25-00 Accelerometer Interface Standard Cable 25m

Product Overview

When vibration monitoring systems demand reliable signal transmission in harsh environments, the Bently Nevada 200152-25-00 Accelerometer Interface Standard Cable delivers a cost-effective solution. This 25-meter cable, with connector on accelerometer end only, is part of the 200151 model family and is engineered for long-term performance in industrial rotating machinery applications. By ensuring consistent signal integrity, this cable reduces unplanned downtime and lowers total cost of ownership.

Technical Specifications

The 200152-25-00 features a 25-meter cable length, as indicated by the -25 suffix in the ordering code. It uses a standard coupling nut (-00) for secure connection. The cable construction includes 4 conductors of 22 AWG with a braided shield and drain wire (85% coverage, minimum) and a PVC outer jacket. Nickel-plated coupling nuts provide corrosion resistance. The connectors achieve an IP67 seal to transducers and mating hardware, and are molded to the cable for durability. The addition of DC4 electrical insulating compound in the connectors offers extra protection against moisture during thermal shock. Operating temperature range is -20°C to +100°C (-4°F to +212°F). Minimum bend radius is 73.7 mm (2.9 in).

Industry Applications

This cable is ideal for connecting accelerometers in turbine, compressor, and pump monitoring systems. In a typical petrochemical plant, the 200152-25-00 ensures vibration data from critical rotating assets reaches the monitoring system without signal degradation. The IP67 seal and wide temperature range make it suitable for outdoor and washdown environments. Using this cable reduces the risk of false alarms and maintenance costs associated with connector failures.

Installation & Setup Guidance

When installing the 200152-25-00, ensure the cable is routed with a bend radius larger than 73.7 mm to avoid damage. Avoid flexing the cable at temperatures below -20°C. Secure the coupling nut finger-tight plus a quarter turn using a wrench on the hex nut only. Verify the connector seal is clean and free of debris before mating. For installations where the cable may be exposed to flexing at low temperatures, consider using a protective conduit.

Maintenance & Reliability

Regularly inspect the cable jacket for cuts or abrasions, especially in high-traffic areas. Check coupling nuts for tightness and signs of corrosion. The molded connectors and IP67 seal minimize maintenance needs, but periodic visual inspection helps extend service life. Replacing a damaged cable proactively avoids costly unplanned shutdowns. The 200152-25-00 is designed for long-term reliability, reducing replacement frequency and associated labor costs.

Selection Guide & Purchasing Advice

Before ordering, verify the required cable length for your installation. The -25 suffix indicates 25 meters. Confirm compatibility with your accelerometer model and monitoring system. For applications requiring a connector on both ends, consider other models in the 200151 series. BluePLC Industrial offers the Bently Nevada 200152-25-00 with fast shipping and expert support to help you select the right cable for your vibration monitoring needs.