Bently Nevada 200152-04-CN Accelerometer Interface Cable, 4.0m

Product Introduction

In the early days of industrial vibration monitoring, cable failures were a leading cause of false alarms and unplanned downtime. The Bently Nevada 200152-04-CN accelerometer interface cable was engineered to solve this problem, providing a robust, shielded connection for critical machinery protection systems. As part of the 200151 model series, this cable ensures that the signal from your accelerometer reaches the monitoring system with minimal interference, even in the most demanding plant environments.

Technical Specifications Breakdown

The 200152-04-CN is defined by its ordering information: the model is 200151, an Accelerometer Interface Standard Cable with connector on accelerometer end only. The cable length is 4.0 meters, indicated by the -04 suffix, and the coupling nut is country-specific, denoted by -CN. These parameters ensure a precise fit for your installation requirements.

Industry Applications

This cable is essential for vibration monitoring on rotating equipment such as turbines, compressors, pumps, and motors. In a typical refinery application, the 200152-04-CN connects a Bently Nevada accelerometer to a monitoring system, providing continuous data on bearing condition and imbalance. The 4.0-meter length offers flexibility for routing in tight spaces while maintaining signal integrity.

Installation & Setup Guidance

When installing the 200152-04-CN, ensure the connector is securely tightened to the accelerometer to achieve an IP67 seal. Route the cable away from high-heat sources and sharp edges. The minimum bend radius is 73.7 mm (2.9 in) to prevent damage. For installations below -20 °C, avoid flexing the cable to prevent cracking.

Maintenance & Reliability

Regular inspection of the cable jacket and connectors is recommended. The braided shield and drain wire provide 85% coverage minimum, protecting against electromagnetic interference. The PVC outer jacket resists moisture and chemicals. If the cable is used in extreme temperatures, verify that the installation prevents flexing to extend service life.

Selection Guide & Purchasing Advice

Before ordering the 200152-04-CN, confirm your accelerometer model and the required connector type. The -CN coupling nut is country-specific, so verify compatibility with your hardware. For complete technical specifications, contact BluePLC Industrial. We stock genuine Bently Nevada cables to ensure reliable operation in your critical machinery monitoring system.