Bently Nevada 200151-60-02-02 Accelerometer Standard Cable 6.0m

Product Introduction

When vibration monitoring systems demand reliable signal transmission, the Bently Nevada 200151-60-02-02 accelerometer standard cable delivers consistent performance. This 6.0-meter interface cable features connectors on both ends, ensuring a secure connection between accelerometers and monitoring hardware. Designed for industrial environments, it supports accurate data acquisition for predictive maintenance and machine health programs.

Technical Specifications

The 200151-60-02-02 is part of the 200151 model series, specifically configured as an accelerometer interface standard cable with connectors on both ends. The cable length is 6.0 meters, as indicated by the -60 suffix. The armor option 02 designates a blue cable without armor. The coupling nut option 02 specifies a nylon coupling nut. The minimum bend radius is 63.5 mm (2.5 in). The operating temperature range is -20 ºC to +100 ºC (-4 ºF to +212 ºF). These cables may be used at lower temperatures if the installation prevents flexing or bending. Flexing at temperatures below -20 ºC (-4 ºF) may damage the cables. The construction is 4-conductor, 22 AWG with braided shield and drain wire (85% coverage, minimum), PVC outer jacket, and nickel-plated coupling nuts. Connectors provide an IP67 seal to transducers and mating hardware and are molded to the cable. The addition of DC4 electrical insulating compound in the connectors provides additional protection against moisture during thermal shock. The temperature range for the DC4 compound is -55 ºC to +121 ºC (-67 ºF to +250 ºF) with a cure time of 24 hours.

Industry Applications

This cable is ideal for rotating machinery monitoring in sectors such as power generation, oil and gas, and manufacturing. For example, connecting accelerometers on pumps or compressors to data acquisition systems ensures reliable vibration data for early fault detection. The IP67 seal makes it suitable for harsh environments where moisture or dust is present.

Installation & Setup Guidance

When installing the 200151-60-02-02, ensure the cable is routed without sharp bends—the minimum bend radius is 63.5 mm. Avoid flexing the cable at temperatures below -20 ºC to prevent damage. Secure the connectors firmly to transducers and mating hardware to maintain the IP67 seal. For installations requiring additional moisture protection, apply DC4 electrical insulating compound as specified.

Maintenance & Reliability

Inspect the cable periodically for cuts, abrasions, or damage to the PVC jacket. Check connector seals for integrity to maintain IP67 protection. In environments with temperature fluctuations, verify that the DC4 compound remains intact. Proper handling and storage within the specified temperature range extend service life.

Selection Guide & Purchasing Advice

Before ordering, confirm your system requires a 6.0-meter cable with connectors on both ends and a blue cable without armor. Verify compatibility with your accelerometer and monitoring hardware. For complete technical specifications for the 200151-60-02-02, please contact BluePLC Industrial.