Bently Nevada 200151-60-02-00 Accelerometer Standard Cable 6m

Product Overview

When vibration monitoring systems fail due to cable degradation, machinery protection is compromised. The Bently Nevada 200151-60-02-00 accelerometer standard cable provides a robust, factory-terminated connection between accelerometers and monitoring hardware. This 6.0-meter cable with connectors on both ends ensures signal integrity in harsh industrial environments.

Technical Specifications

The 200151-60-02-00 is part of the 200151 Accelerometer Interface Standard Cable family. Key specifications include:

Model: 200151 - Accelerometer Interface Standard Cable, Connectors on Both Ends

Cable length: 6.0 meters

Armor option: Blue cable without armor

Coupling nut: Standard coupling nut

Construction: 4-conductor, 22 AWG with braided shield and drain wire (85% coverage, minimum), PVC outer jacket, nickel-plated coupling nuts

Seal: Connectors provide IP67 seal to transducers and mating hardware; connectors are molded to the cable; addition of DC4 electrical insulating compound provides additional moisture protection during thermal shock

Minimum bend radius: 63.5 mm (2.5 in)

Operating temperature range: -20 ºC to +100 ºC (-4 ºF to +212 ºF); cables may be used at lower temperatures if installation prevents flexing or bending (flexing below –20 ºC may damage cables)

Industry Applications

This cable is ideal for connecting Bently Nevada accelerometers in rotating machinery monitoring systems—turbines, compressors, pumps, and fans. The IP67 seal and robust construction suit applications in oil and gas, power generation, petrochemical, and heavy manufacturing where moisture, vibration, and thermal cycling are common. The 6.0-meter length provides flexibility for mounting in tight or remote locations.

Installation and Setup Guidance

When installing the 200151-60-02-00, ensure the cable bend radius does not exceed 63.5 mm to prevent internal conductor damage. Secure the cable along its path to avoid flexing at temperatures below -20 ºC. Verify that the coupling nuts are tightened to the transducer and mating hardware to maintain the IP67 seal. Avoid exposing the cable to sharp edges or abrasive surfaces that could damage the PVC jacket.

Maintenance and Reliability

Regularly inspect the cable jacket for cuts, abrasions, or chemical exposure. Check connector integrity and seal condition, especially after thermal cycling. The molded connectors and DC4 compound provide long-term moisture resistance, but periodic visual inspection helps ensure reliable signal transmission. Replace the cable if damage is found to maintain system accuracy.

Selection Guide and Purchasing Advice

Before ordering the 200151-60-02-00, confirm your accelerometer model and required cable length. This variant uses a blue cable without armor—if additional mechanical protection is needed, consider armored options. The standard coupling nut fits most Bently Nevada transducers. For complete technical specifications, please contact BluePLC Industrial.